FEATURES

• Reinforced tooth for increased durability when cutting through nails and other foreign objects
• +6 degree hook angle for fast, aggressive cuts
• Specially formulated anti-stick coating minimizes friction and gum-up for smoother cuts
• Raker tooth design increases the tooth contact area for faster cuts

APPLICATIONS

• Wood

DESCRIPTION

• Ideal for drilling in concrete and masonry from 4 to 28mm
• Rotation stop for light chiseling work in masonry; stone and concrete
• Tool-free interchangeable tool holder and 13mm keyless
• Impact-stop for drilling in wood; steel; etc.
• Very high rate of penetration through optimally tuned electro-pneumatic hammer mill
• Safety clutch for active protection of user and machine
• Electronic speed and blow regulation
• Ergonomic rubberized grip areas
• Ergonomic rubberized auxiliary handle with light
• Very long service life due to fully synchronized transmission
• Maximum dust protection through an innovative sealing system
• Extremely compact and robust construction

SPECIFICATIONS

• Power Input: 900 Watts
• No Load speed: 0-1450 U / min
• Single blow energy (EPTA 05/2009): 3.0 Joule
• Blows per minute: 0-5350 bpm
• Bit retainer: SDS-plus
• Max. Drilling capacity (wood): 30 mm
• Max. Drilling capacity (metal): 13 mm
• Max. Drilling capacity (concrete): 28 mm
• Max. Drilling Capacity (Core Bit) : 65 mm
• Weight: 3.1 kg, Length: 360 mm, Height: 210 mm
• Vibrations – Drilling in concrete Hammer: 14.9 m/s²
• Uncertainty K 1 (Vibration): 1.5 m/s²
• Hand / Arm Vibration – Chiseling: 13.8 m/s²
• Uncertainty K 2 (Vibration): 1.5 m/s²
• Vibrations – Drilling in metal: <2.5 m/s²
• Uncertainty K 3 (Vibration): 1.5 m/s²
• Hand / arm vibration screws without knock function: <2.5 m/s²
• Uncertainty K 4 (vibration): 1.5 m/s²
• Sound pressure: 89 dB (A)
• Uncertainty K 1 (noise): 3.8 dB (A)
• Sound pressure: 100.1 dB (A), Uncertainty K 2 (noise): 3.8 dB (A)

DESCRIPTION

A reliable, general purpose electrode for manual metal arc welding of carbon steels, carbon manganese steels and fine-grained carbon manganese steels with elevated yield strength. OK 48.00 deposits a tough, crack-resistant weld metal. The coating is of the low moisture absorption type. High welding speed in the vertical-up position. OK 48.00 is insensitive to the composition of the base material within fairly wide limits. The electrode can be used for welding structures where difficult stress conditions cannot be avoided. Tested according to NACE TM0177 and TM0284. Diffusible Hydrogen tested in various conditions show values below 3 ml/100g.

HIGHLIGHTS

• H4 R approved
• Low diffusible hydrogen to reduce the risk for cold cracking
• Outstanding low moisture pick up
• High efficiency bringing productivity
• Extremely good weldability in vertical up position
• Exceptional weld appearance

INDUSTRIES

• Civil Construction
• Energy
• Industrial and General Fabrication
• Light Fabrication
• Marine and Offshore

SPECIFICATIONS

• Diameter: 3.2 x 350.0 mm(1/8 x 13.8 in.)
• Amps:90-140 A
• Volts:23 V
• Fusion time per electrode at 90Per I max:85Sec
• Deposition rate at 90Per: 1.33 kg/h(2.9 lbs/h)
• Efficiency (Per):73%
• Number of electrodes/kg weld metal:31

DESCRIPTION

• Type: ES14A
• Thread:1/4" male
• Design type:unidirectional
• Material:Brass
• Poetry:Coupling seal: NBR
• Nominal size:7.2mm
• Temperature application range:approx. -20 °C to approx. +100 °C
• Operating pressure:35 bar/20 °C
• Manufacturer:Ludecke
• Hazardous substance:no